2nd boot light

[gus]

I shall be fitting a 2nd boot light tomorrow, what's the easiest route for the wiring?

Did you just run live feed? Earth somewhere local?

Complete novice so info greatly received

[Cb_newbie]

Might be worth having a look here:

viewtopic.php?f=5&t=1484

That's what I did with mine, makes the world of difference!!-I just cut off the old bulb holder & attached LEDs to that

[Billy_boy11]

all i did was cut the old plug and wired it straight in and ran in round and under the plastic trim round to otherside and cut hole in same place as other to fit the led no need for a live feed

[marshboy]

I cut both wires in the original light then run the loom up the c pillar trim through the roof lining and down the other c pillar!