FiestaMk7.com Owners Resource

hi.. i just finished reading your long guide which was very useful indeed.. but i wanted to know, for those who have installend xenon kits, where do you guys put the ballasts?

What side light bulbs would you recommend to go with Osram nightbreakers

Thought i would provide some clarity on the rear light issue. this is from a 2010 car.
First remove the two torx screws on the outside edge (T25 ideally, but a flat blade can be used in these screws too)



This is interior. the thumb screw cant be reached without moving the carpet trim.



I removed the flat bladed screw, but might not be necessary. if you ease back the boot seal you can see the edge of the carpet to make it easier to pull down



This (right hand on left hand of car) is how far your hand needs to be in to reach the thumb screw



the threads are quite long, but be careful not to drop it



The unit can now be pulled out (towards the rear of the car). Two pegs on the outside of the light are in rubber locators.
Squeeze the clip on the cable socket and pull apart



The bulb holder is removed with a squeeze of two clips

Any one got any link for front and back indicators , silvertec or similar ?

Rogue_Shadow wrote:

With the bulb holder free, you can remove the bulb. This bulb is removed by pulling it out, I'll show you what part pulls away from what.



If that's still unclear what pull away from what, read on. It may become more clear as we install the new bulb.

Is there a trick to get them apart? Mine is stuck, and I dont want to use force to do it. Any help would be much appreciated

Best regards

Tommy

Just changed headlamp bulb in place, Why do people say you have to remove headlamp?....

anelka wrote:
Is there a trick to get them apart? Mine is stuck, and I dont want to use force to do it. Any help would be much appreciated

Best regards

Tommy

I'm having this problem too, so any help would also be much appreciated. I've tried pulling the bulb out but it's not budging! Is there an extra clip or something or does it just need some force?

By the way I managed to get access to the dipped beam H7 bulb without needing to take the headlamp out.

Cheers,
Mark

Awesome and Easy Guide to follow! Thanks Rogue_Shadow

me too Excellent guide, just put some silvervision indicators and osram nightbreaker plus bulbs in, much better than standard..