FiestaMk7.com Owners Resource

Bought this off eBay for £9.99
Don't have any decent scrappys near me

Prise light out.. Spring catch at the front keeps it in

Unplug light.. Unscrew 2 torx screws

Pull out original trim.. Back to front

Mark out the size of the new hole.. Measure twice and cut once lol

Cut out the new hole.. I used a stanley knife.. Ensure blade is sharp
And remove metal surround

The black part on the back of the sunglasses holder unclips off the grey part
Remove the black part.. 4 clips.. And put this in roof lining

Plug microphone back in.. If you have one
Make sure wires for light are accessible
Clip in new trim.. Clip front in then back

Plug light back in and replace
Insert sunglasses
Sit back and appreciate

hi ben what year mondeo is the holder out of ??

Mk3 (2001-2007)

might look into doing it if you dont mind me stealing your idea

Course not!

I did this at the weekend! It looks great
This guide is spot on and all you need to do it. I wouldnt have attempted it without this

Thanks Ben

Glad it went well!

Looking at doing this next weekend.
But a bit clueless when it comes to the lights with the map reading lights aswell, are there different wires or whatever that i'll need to add/wire to somewhere for them to work aswell, or is it all incorporated into the main light?

Seans_Fes_Mk7 wrote:Looking at doing this next weekend.
But a bit clueless when it comes to the lights with the map reading lights aswell, are there different wires or whatever that i'll need to add/wire to somewhere for them to work aswell, or is it all incorporated into the main light?

Theres two plugs on the standard light unit which just go straight on to the unit with map lights, these power all the lights.

Brilliant, thanks alot
I'm dreading cutting the roof liner apart though Don't even want to consider messing up and then putting up with a huge hole in the liner until i get a probably very expensive new one!!